You finally dig out a TV season box set, put disc one into your laptop, and the first episode plays. Then you try to watch episode two. Maybe the episode menu never appears. Maybe you click episode two and episode one starts again. Or you open the discâs files, double-click something, and get episode one no matter which file you pick.
The disc is usually fine. TV DVDs are built around their menus, and on a Windows PC the problem is nearly always how the disc is being opened. This guide explains why it happens and how to get to every episode.
Quick answer: A TV series DVD stores episodes as separate titles or chapters, and the disc menu is what jumps between them. If you open the disc without its menu, or open the files in
VIDEO_TSdirectly, most players start the first title, which is usually episode one. Open the disc as a disc, with menus on, and pick the episode from the menu. MediaPlay DVD Player (free, Microsoft Store) shows the disc menu and lets you choose episodes with the mouse or arrow keys. In VLC, untick No disc menus in Media â Open Disc, or use the Playback â Title menu.
Why a TV DVD behaves differently from a movie
A movie DVD has one main feature. A TV season disc holds several episodes, and the disc author decides how to store them:
- Each episode as its own title. Episode one is title 1, episode two is title 2, and so on.
- All episodes in one title, split by chapters. Each episode starts at a different chapter.
- A mix of both, often with an extra âPlay Allâ title that runs every episode back to back.
The disc menu ties this together. When you select âEpisode 2â on the menu, the button runs a small command that tells the player which title or chapter to jump to. That is why the menu matters so much on TV discs: it is the map to everything after episode one.
If you want to understand the files themselves, our guide to why a DVD opens as files instead of playing explains what VIDEO_TS, .VOB and .IFO files are.
The four common causes
1. The disc was opened without its menu
Some players can skip DVD menus and go straight to playback. VLC has a No disc menus checkbox in its Open Disc dialog. It is meant to be off by default, but at least one user on VLCâs forum reported finding it ticked, so check it before you click Play. With menus skipped, the player starts the first title, so you get episode one and never see the episode list.
2. The files were opened instead of the disc
Double-clicking VTS_01_1.VOB or opening the VIDEO_TS folder as a list of files plays raw video segments. The first set of files usually holds the first title, so you see episode one, often without subtitles turned on, sometimes in the wrong colors, and possibly with a different audio track. The navigation that leads to the other episodes lives in the .IFO files and the menu, and a file-by-file approach ignores both.
3. The player doesnât follow the menu commands correctly
This is the most confusing version: the menu appears, you click episode two, and episode one plays anyway. It means the button command was not followed through. Users on the VideoLAN and VideoHelp forums describe exactly this symptom with some discs and player versions. A player with full DVD navigation follows the command to the right title or chapter.
4. You pressed âPlay Allâ or a resume prompt
Many TV discs start with âPlay Allâ highlighted, and some ask whether to resume. Pressing Enter without looking starts from episode one by design. Check which button is highlighted before you confirm.
A fifth, rarer cause is physical: if episode one plays but a later episode freezes or skips, the disc may be scratched or smudged over the area where that episode is stored. Wipe it in straight lines from the center outward and try again. Some discs also use deliberately confusing title layouts, so picking titles by number can take some trial and error.
How to play episode two (and the rest)
In MediaPlay DVD Player
MediaPlay DVD Player is built around disc playback, menus included.
- Install MediaPlay from the Microsoft Store and insert the disc. If MediaPlay is your AutoPlay choice for DVDs, playback starts on its own. Otherwise open the disc from the app.
- To have discs open on their menu, turn on Show the disc menu when a DVD starts in Settings. It is available in the free version.
- On the disc menu, choose the episode list or âEpisodesâ page, then click the episode you want. You can also move between menu buttons with the arrow keys.
- The disc should jump to the episode you chose.
For a season box set, two more things help. MediaPlay can resume movies and discs from where you stopped, so you can pick up mid-episode the next evening. A-B repeat (shortcut L) loops a scene if you want to rewatch a moment. The free version shows ads in the app and during playback. A one-time upgrade ($12.99 in the US) removes them for uninterrupted viewing, with no subscription.
In VLC Media Player
VLC is free and can play TV discs, but you need to make sure menus are on.
- Open VLC and go to Media â Open Disc.
- Select DVD, choose your disc drive, untick âNo disc menusâ, and leave Title and Chapter at their defaults.
- Click Play. The disc should open on its menu, where you can pick the episode.
- If the menu still sends you back to episode one, open the disc with menus off and use Playback â Title (or Chapter) to jump straight to the episode. Episode two is often title 2, but discs differ, so try the next titles until the right episode starts.
In a VLC bug report, a VLC developer advised leaving the Title and Chapter fields in the Open Disc dialog unset and navigating after the disc is open. Setting a title there can stop menu selections from working.
If a disc still wonât cooperate
- Try the disc in a second player. If it plays correctly elsewhere, the first playerâs DVD navigation is the issue.
- Check the disc for scratches and clean it from the center outward.
- If you copied the disc to your PC, open the folder that contains
VIDEO_TSas a disc (Open Disc â Browse in VLC, or open the DVD/VIDEO_TS folder in MediaPlay), not the individual.VOBfiles. - For general playback failures, see our DVD wonât play on Windows 11 troubleshooting guide.
Why this mostly happens on PCs
Standalone DVD players are built around the disc menu: the remoteâs arrow keys and Enter button are made for it, so menu commands almost always work. On a PC, the software decides how to open the disc. Since Windows 8, Windows hasnât included DVD playback, so every PC owner relies on a separate app. Some of those apps are general media players that treat a DVD as a folder of video files. That works for movies and breaks down on TV discs, where everything after episode one depends on the menu.
Choosing a player that handles DVD menus properly is the real fix. Our best DVD player software for Windows comparison covers the options.
FAQ
Why does my DVD keep going back to episode one?
Usually because the player isnât following the disc menuâs commands, or the disc was opened without its menu. Open the disc with menus enabled in a player with full DVD navigation, then pick the episode from the menu.
How do I choose an episode on a DVD on my laptop?
Open the disc as a DVD, not as files, in a player that shows disc menus. In MediaPlay DVD Player, click the episode on the menu or move to it with the arrow keys. In VLC, untick âNo disc menusâ in Media â Open Disc, or use Playback â Title after the disc is open.
Why does VLC only play the first episode of my DVD?
One common reason is that the disc was opened with âNo disc menusâ ticked in Media â Open Disc, or with a Title number set there. With menus skipped, VLC starts the first title. Untick the option, leave Title and Chapter at their defaults, or use Playback â Title to jump to another episode.
Can I play a specific episode by opening the VOB files?
Not reliably. VOB files are segments of video, and the first ones usually hold the first title. Opening them directly skips the menu and navigation data, so you often get episode one without subtitles turned on, or with a different audio track.
My DVD shows the menu, but clicking episode two plays episode one. Is the disc broken?
Probably not. It usually means the player isnât carrying out the buttonâs command correctly. Try the disc in a different player. If episode two plays there, the disc is fine.
Do TV DVDs need a special player on Windows 11?
They need a player that supports DVD menus and navigation. Windows 11 doesnât include DVD playback, so install a DVD player app such as MediaPlay DVD Player or VLC.
Trademark notice
VLC is a trademark internationally registered by the VideoLAN non-profit organization. Microsoft and Windows are trademarks of the Microsoft group of companies. All other product names are trademarks of their respective owners. RoxyApps is not affiliated with or endorsed by these organizations.
Sources
- VideoLAN Forums: Cannot play anything but Episode 1
- VideoHelp Forum: DVD Episode Problem
- VideoLAN Forums: âOpen Mediaâ dialogue default options
- Launchpad (VLC bug report): Fails to play DVD menu selection if played with non-zero title number
- MediaPlay DVD Player: Microsoft Store listing
Final takeaway
A TV DVD that only plays episode one is rarely a broken disc. It is a disc opened without its menu, opened as files, or played in software that doesnât follow the menuâs commands. Open it as a disc, keep menus on, and pick the episode from the menu.
If you want the season box set to just work, MediaPlay DVD Player is free from the Microsoft Store. It opens the disc menu, lets you pick episodes with the mouse or arrow keys, and resumes where you stopped. A one-time $12.99 upgrade removes the ads when youâre ready to binge without interruptions.